Class A Written Test

How can you ensure that the vehicle has passed an annual inspection?

A police or appointed ministry officer has the authority to perform a safety inspection:

A properly completed daily inspection report contains:

You must ensure that the following items are secure on the vehicle:

A front tire fails an inspection if the tread on two adjacent grooves anywhere on the tire are:

What is the minimum number of consecutive off-duty hours you must take after accumulating 13 hours driving time?

Three of the following four are good practices before backing. Which is not?

Which of the following steps do you perform after you raise and secure the landing gear?

After the jaws lock when coupling, you should:

This sign means:

After stopping on an uphill grade, when rejoining traffic you should:

The main reason you should check under the hood is:

This sign means:

When backing up the tractor to couple with the trailer, you must:

The maximum length of a combination vehicle is:

Many commercial motor vehicles have a speed limiting system which limits their maximum speed to:

Dangerous goods transported on Ontario's roads and highways are identified:

If during the course of a trip you discovers a minor defect, you must:

Three of the following activities are considered on-duty, which one is off-duty?

When making a right turn to prevent the wheels from going over the curb or sidewalk, you should;

After a daily inspection, you discover the vehicle does not have any working brake lamps. What must you do?

You can be required to attend a truck inspection station at the request of a:

Before reversing you should:

When your wheels have been in for service, it is important that you:

You cannot drive a commercial motor vehicle after accumulating how many on-duty hours in a seven day cycle?

When approaching a roundabout you must:

Anti-lock braking systems (ABS):

The maximum width of a commercial motor vehicle, including the load, shall not exceed:

When approaching an intersection and you notice the roadway beyond is blocked with traffic, you should:

This sign means:

Which of the following items are checked at a truck inspection station

The driver of which of the following vehicles must adhere to hours of service regulations:

To ensure brakes are functioning normally, you should test the brakes:

The easiest and safest backing manoeuvre is:

As a driver you should minimize possible development of a dangerous situation by:

When uncoupling a trailer, after having lowered the landing gear you should:

A licensed driver learning to operate a commercial motor vehicle must:

When the driver of another vehicle is about to overtake and pass your vehicle, you must:

This sign means:

When rounding a right curve on a highway with a tractor-trailer, you should:

If driving over the centre line while making a right hand turn, you must:

If during the course of a trip you discover a minor defect, you must:

Which of the following is true when driving a in a roundabout:

This sign means:

The main reason you should check under the hood is:

When flares or reflectors are required to mark a disabled commercial motor vehicle On a highway, you must place them:

What documentation is not required by the Highway Traffic Act to be carried in a commercial motor vehicle?

After you detect and record a major defect on your daily inspection report, you must:

Who is permitted to change a tire on a commercial motor vehicle?

When a daily log is required, you must track:

Before descending a steep hill, a good safe driving practice is to:

Any load which projects from the rear of the vehicle by 1.5m (5 feet) or more must be marked with:

When starting to move a loaded tractor trailer, the vehicle should be put in:

When uncoupling, the landing gear should:

When are you required to carry the daily inspection report and applicable schedule?

What factor does not affect the maximum allowable gross weight of a commercial vehicle?

This sign means:

Allowing the clutch to slip will result in:

When climbing a steep hill and your speed is reduced you should:

Which of the following would be considered a minor defect when conducting a daily inspection?

What is the maximum number of hours you can drive in a day?

To safely complete a turn you should:

When you perform a daily inspection and find no defects, what must you do?

The purpose of a central apron in a roundabout is to:

When can you drive the vehicle after identifying a major defect?

You may notice excessive lash or free play which may indicate a defect in:

This sign means:

What is the maximum number of hours that a daily inspection report is valid for:

You must inspect the load securement and make necessary adjustments after:

Who is responsible for ensuring that loads are secured while in operation:

A good safe driving practice on a multi-lane highway is to:

To assist you in performing the daily inspection, it is necessary to:

Gross weight of a commercial motor vehicle means:

Excessive free play or lash e.g., over 10cm (4 inches), may indicate to you that:

When approaching a railway crossing and the signals lights are activated, you must stop:

The responsibility for the safe operating condition of a commercial motor vehicle is that of:

The key principle in loading any cargo on a commercial vehicle is to ensure:

This sign means:

The maximum height of a commercial motor vehicle, including the load is:

If you are required to hook up a trailer at a remote location, you must:

You are required to ensure that the brakes on the vehicle are not out-of-adjustment:

After coupling, if any space appears between the upper plate of the trailer and fifth wheel, this indicates that:

This sign means:

This sign means:

This sign means:

The person who cannot be charged with an offence for an overloaded vehicle is:

When reversing to couple a trailer, the fifth wheel opening must be in direct line with:

What distance must you maintain between commercial motor vehicles travelling in the same direction on a highway?

When driving larger vehicles you must always be aware of the vehicle's height and width to ensure:

A longer wheel base between the front wheels and the rear wheels of the vehicle creates:

Before moving the tractor to couple with the trailer you must:

Prior to coupling you should check to ensure:

A rear tire fails and inspection if the tread on two adjacent grooves anywhere on the tire are:

In order to transport dangerous goods, you must: